Depending on big you want your frame to be, you may need a lot of bottle caps for this project. I used a 16 x 20 frame and I used around 221 bottle caps. If you need bottle caps visit me at http://www.etsy.com/shop/serendipitysscavenge and if you let me know that you’re from my blog then I’ll give you free shipping.
-
- Pretty much this is one step process repeated 221 times. I used a hot glue gun and in order to get the cleanest look, I glued the very edge of the inside rim. I left a couple holes so the wall attachments wouldn’t be covered up. If you have any questions feel free to leave a comment below.
Want more ideas? Check out my DIY page.
In making a small table for a friend.the table is particle board. Will the jb weld adhere to it
You wouldn’t want to use jb weld for that. Hot glue should work, but I’ll give you a couple of links that talk about you’ll need for the project.
http://www.instructables.com/id/Bottle-Cap-Table-with-Poured-Resin-Surface/step4/Begin-gluing/
http://windfarmisrecords.blogspot.com/2009/07/how-to-make-bottle-cap-table.html
Thanks for coming by and I hope this helps!